LtAP mini LTE kit
The LTAP mini-LTE kit is a small weatherproof wireless access point with a built-in cellular modem that supports 2G, 3G and 4G (LTE) connectivity on International LTE bands 1,2,3,7,8,20,38 and 40.
Connect to the LTAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LTAP mini-LTE also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging.
LTAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses, or trains. External GPS antenna is available for ordering separately (not included product code ACGPSA).
Security policy
Delivery policy
|
Product code |
RB912R-2nD-LTm&R11e-LTE |
|
Architecture |
MIPSBE |
|
CPU |
QCA9531 |
|
CPU core count |
1 |
|
CPU nominal frequency |
650 MHz |
|
Dimensions |
139 x 77 x 28,5 mm |
|
RouterOS license |
4 |
|
Operating System |
RouterOS |
|
Size of RAM |
64 MB |
|
Storage size |
16 MB |
|
Storage type |
FLASH |
|
MTBF |
Approximately 200'000 hours at 25C |
|
Tested ambient temperature |
-40°C to 70°C |
|
MicroUSB input Voltage |
5-5 V |
|
Number of DC inputs |
3 (DC jack, PoE-IN, MicroUSB) |
|
DC jack input Voltage |
8-30 V |
|
Max power consumption |
9 W |
|
Cooling type |
Passive |
|
PoE in |
802.3af/at |
|
PoE in input Voltage |
12-57 V |
|
2G Category |
Class12 |
|
2G bands |
2 (1900MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz) |
|
3G Category |
R7 (21Mbps Downlinks, 5.76Mbps Uplink) |
|
3G bands |
1 (2100MHz) / 2 (1900MHz) / 5 (850MHz) / 8 (900MHz) |
|
LTE Category |
4 (150Mbps Downlink, 50Mbps Uplink) |
|
LTE FDD bands |
1 (2100MHz) / 2 (1900MHz) / 3 (1800MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) |
|
LTE TDD bands |
38 (2600MHz) / 40 (2300MHz) |
|
Wireless 2.4 GHz Max data rate |
300 Mbit/s |
|
Wireless 2.4 GHz number of chains |
2 |
|
Wireless 2.4 GHz standards |
802.11b/g/n |
|
Antenna gain dBi for 2.4 GHz |
1.5 |
|
Wireless 2.4 GHz chip model |
QCA9531 |
|
Wireless 2.4 GHz generation |
Wi-Fi 4 |
|
10/100 Ethernet ports |
1 |
|
Number of SIM slots |
2 Modem (Mini SIM) |
|
MiniPCI-e slots |
1 |
|
Serial console port |
RS232 |
|
Number of USB ports |
1 |
|
USB Power Reset |
Yes |
|
USB slot type |
microUSB type AB |
|
Max USB current (A) |
1 |
|
Mode button |
Yes |
|
GNSS standards |
GPS |
|
GPS RF connector type |
uUFL |
|
Certification |
CE, FCC, IC, E-MARK, EAC, ROHS |
|
IP |
IP20 |
The LTAP mini-LTE kit is a small weatherproof wireless access point with a built-in cellular modem that supports 2G, 3G and 4G (LTE) connectivity on International LTE bands 1,2,3,7,8,20,38 and 40.
Connect to the LTAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LTAP mini-LTE also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging.
LTAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses, or trains. External GPS antenna is available for ordering separately (not included product code ACGPSA).
arrow_upward