RB5009UG+S+IN
The board features 9 wired ports and a full-sized USB 3.0. Seven of the ports are Gigabit Ethernet, another one is 2.5 Gigabit Ethernet, and the last one is a 10G SFP+ cage. All the ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU. Both CPU and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink!
RB5009UG+S+IN can be powered in 3 different ways: PoE-in from Ethernet port #1, DC Jack, 2-pin terminal on the side.
Boards come with 1GB of DDR4 RAM and 1GB NAND storage. This combination of ports and components, compared to our other products in a similar form factor, provides almost double the performance in configurations with heavy CPU loads.
With a simple set of mounting accessories, you can mount FOUR of these routers in a single 1U rackmount space!
Security policy
Delivery policy
|
Product code |
RB5009UG+S+IN |
|
Architecture |
ARM 64bit |
|
CPU |
88F7040 |
|
CPU core count |
4 |
|
CPU nominal frequency |
350-1400 (auto) MHz |
|
RouterOS license |
5 |
|
Operating System |
RouterOS (v7 only) |
|
Size of RAM |
1 GB |
|
Storage size |
1 GB |
|
Storage type |
NAND |
|
MTBF |
Approximately 200'000 hours at 25C |
|
Tested ambient temperature |
-40°C to 60°C |
|
Number of DC inputs |
3 (DC jack, PoE-IN, 2-pin terminal) |
|
DC jack input Voltage |
24-57 V |
|
2-pin terminal input Voltage |
24-57 V |
|
Max power consumption |
20 W |
|
Max power consumption without attachments |
14 W |
|
FAN count |
Passive |
|
PoE in |
802.3af/at |
|
PoE in input Voltage |
24-57 V |
|
10/100/1000 Ethernet ports |
7 |
|
Number of 2.5G Ethernet ports |
1 |
|
SFP+ ports |
1 |
|
Number of USB ports |
1 |
|
USB Power Reset |
Yes |
|
USB slot type |
USB 3.0 type A |
|
Max USB current (A) |
1 |
|
CPU temperature monitor |
Yes |
|
Certification |
CE, EAC, ROHS |
The board features 9 wired ports and a full-sized USB 3.0. Seven of the ports are Gigabit Ethernet, another one is 2.5 Gigabit Ethernet, and the last one is a 10G SFP+ cage. All the ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU. Both CPU and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink!
RB5009UG+S+IN can be powered in 3 different ways: PoE-in from Ethernet port #1, DC Jack, 2-pin terminal on the side.
Boards come with 1GB of DDR4 RAM and 1GB NAND storage. This combination of ports and components, compared to our other products in a similar form factor, provides almost double the performance in configurations with heavy CPU loads.
With a simple set of mounting accessories, you can mount FOUR of these routers in a single 1U rackmount space!
arrow_upward