NetMetal ac² (HGO-antenna-OUT included)
The new NetMetal ac² AP is sturdy, reliable, easy to use and extremely capable. MikroTik has added an out-of-the-box 2.4/5 GHz dual-concurrent (2.4GHz and 5GHz can be used at the same time) band support – no need for additional tinkering!
NetMetal ac² features an improved 4-core CPU and 256 MB RAM and can handle massive loads. There is a miniPCIe slot for an LTE or other wireless modules and an SFP port for fiber. The NetMetal ac² can be a very adaptable addition for all kinds of setups.
Two RP-SMA connectors allow adding an antenna of your choice. For lower range use, NetMetal ac² it is adapted with MikroTik HGO-antenna-OUT screw-on omni antenna unit (included in price).
The enclosure has an IP rating of IP66 with protection against splashing from any angle, but it can still be opened and closed with one hand. Very handy in rough environments!
Security policy
Delivery policy
|
Product code |
RBD23UGS-5HPacD2HnD-NM |
|
Architecture |
ARM 32bit |
|
CPU |
IPQ-4019 |
|
CPU core count |
4 |
|
CPU nominal frequency |
716 MHz |
|
Dimensions |
143 x 247 x 48 mm |
|
RouterOS license |
4 |
|
Operating System |
|
|
Size of RAM |
256 MB |
|
Storage size |
16 MB |
|
Storage type |
FLASH |
|
MTBF |
Approximately 200'000 hours at 25C |
|
Tested ambient temperature |
-40°C to 70°C |
|
IPsec hardware acceleration |
Yes |
|
Number of DC inputs |
2 (DC jack, PoE-IN) |
|
DC jack input Voltage |
12-57 V |
|
Max power consumption |
28 W |
|
Max power consumption without attachments |
12 W |
|
FAN count |
Passive |
|
PoE in |
802.3af/at |
|
PoE in input Voltage |
24-57 V |
|
Wireless 2.4 GHz Max data rate |
300 Mbit/s |
|
Wireless 2.4 GHz number of chains |
2 |
|
Wireless 2.4 GHz standards |
802.11b/g/n |
|
Wireless 2.4 GHz chip model |
IPQ-4019 |
|
Wireless 2.4 GHz generation |
Wi-Fi 4 |
|
Wireless 5 GHz Max data rate |
867 Mbit/s |
|
Wireless 5 GHz number of chains |
2 |
|
Wireless 5 GHz standards |
802.11a/n/ac |
|
Wireless 5 GHz chip model |
IPQ-4019 |
|
Wireless 5 GHz generation |
Wi-Fi 5 |
|
10/100/1000 Ethernet ports |
1 |
|
SFP ports |
1 |
|
Number of SIM slots |
1 Modem (Micro SIM) |
|
MiniPCI-e slots |
1 |
|
Number of USB ports |
1 |
|
USB Power Reset |
Yes |
|
USB slot type |
USB type A |
|
Max USB current (A) |
1 |
|
PCB temperature monitor |
Yes |
|
Voltage Monitor |
Yes |
|
Certification |
CE, FCC, IC, EAC, ROHS |
|
IP |
IP66 |
|
2.4 GHz |
Transmit (dBm) |
Receive Sensitivity |
|
1MBit/s |
30 |
-100 |
|
11MBit/s |
30 |
-94 |
|
6MBit/s |
30 |
-96 |
|
54MBit/s |
27 |
-80 |
|
MCS0 |
30 |
-96 |
|
MCS7 |
26 |
-75 |
|
5 GHz |
Transmit (dBm) |
Receive Sensitivity |
|
6MBit/s |
30 |
-96 |
|
54MBit/s |
27 |
-80 |
|
MCS0 |
30 |
-96 |
|
MCS7 |
26 |
-75 |
|
MCS9 |
23 |
-72 |
<!-- [if gte mso 9]> <w:L
The new NetMetal ac² AP is sturdy, reliable, easy to use and extremely capable. MikroTik has added an out-of-the-box 2.4/5 GHz dual-concurrent (2.4GHz and 5GHz can be used at the same time) band support – no need for additional tinkering!
NetMetal ac² features an improved 4-core CPU and 256 MB RAM and can handle massive loads. There is a miniPCIe slot for an LTE or other wireless modules and an SFP port for fiber. The NetMetal ac² can be a very adaptable addition for all kinds of setups.
Two RP-SMA connectors allow adding an antenna of your choice. For lower range use, NetMetal ac² it is adapted with MikroTik HGO-antenna-OUT screw-on omni antenna unit (included in price).
The enclosure has an IP rating of IP66 with protection against splashing from any angle, but it can still be opened and closed with one hand. Very handy in rough environments!
arrow_upward