wAP
The wAP is a small weatherproof wireless access point for your mobile devices perfect for installation outside your house, anywhere where you need wireless access from your phone or computer.
The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek, available in two colours black (RBwAP2nD-BE) and white (RBwAP2nD).
The wAP can be fixed to any external wall from the inside of the case so that it is securely attached to it's mounting location. The bottom door can be secured with a special screw, which can only be opened by the owner.
It can run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. The unit doesn’t attract attention and blends into any environment.
Security policy
Delivery policy
|
Product code |
RBwAP2nD |
|
Architecture |
MIPSBE |
|
CPU |
QCA9533 |
|
CPU core count |
1 |
|
CPU nominal frequency |
650 MHz |
|
Dimensions |
185 x 85 x 30 mm |
|
License level |
4 |
|
Operating System |
|
|
Size of RAM |
64 MB |
|
Storage size |
16 MB |
|
Storage type |
FLASH |
|
Tested ambient temperature |
-40C to +70C |
|
PoE in |
802.3af/at |
|
PoE in input Voltage |
11-57 V |
|
Number of DC inputs |
2 (DC jack, PoE-IN) |
|
DC jack input Voltage |
11-57 V |
|
Max power consumption |
4 W |
|
Wireless 2.4 GHz Max data rate |
300 Mbit/s |
|
Wireless 2.4 GHz number of chains |
2 |
|
Wireless 2.4 GHz standards |
802.11b/g/n |
|
Antenna gain dBi for 2.4 GHz |
2 |
|
Wireless 2.4 GHz chip model |
QCA9533 |
|
Wireless 2.4 GHz generation |
Wi-Fi 4 |
|
10/100 Ethernet ports |
1 |
|
Certification |
FCC, IC |
|
2.4 GHz |
Transmit (dBm) |
Receive Sensitivity |
|
1MBit/s |
22 |
-96 |
|
11MBit/s |
22 |
-89 |
|
6MBit/s |
20 |
-93 |
|
54MBit/s |
18 |
-74 |
|
MCS0 |
20 |
-93 |
|
MCS7 |
16 |
-71 |
The wAP is a small weatherproof wireless access point for your mobile devices perfect for installation outside your house, anywhere where you need wireless access from your phone or computer.
The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek, available in two colours black (RBwAP2nD-BE) and white (RBwAP2nD).
The wAP can be fixed to any external wall from the inside of the case so that it is securely attached to it's mounting location. The bottom door can be secured with a special screw, which can only be opened by the owner.
It can run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. The unit doesn’t attract attention and blends into any environment.
arrow_upward